• Skip to primary navigation
  • Skip to main content
  • Skip to footer
(952) 915-6466 Info@StructureTech.com
  • Facebook
  • Instagram
  • LinkedIn
  • YouTube
Structure Tech Home Inspections

Structure Tech Home Inspections

Delivering The Unbiased Truth®

  • Services
    • Home Inspections
      • Buyers Inspection
      • New Construction
      • Pre-Drywall
      • Home Maintenance
      • Pre-Listing Inspection
      • Pre-Listing Consultation
      • Walk-Through Consultations
      • 4-Point Inspections
      • Commercial Inspections
    • Radon
    • Sewer
    • Chimney
    • Mold
    • Stucco Testing
    • Truth-In-Housing
    • All Additional Services
  • About
    • Meet The Team
    • Vision, Mission, and Culture
    • Service Area
    • FAQs
  • Blog
  • Podcast
  • Agents / CE
    • For Agents
    • CE Classes
  • Search
  • Pricing
  • Schedule Now

Radon Testing

For Minnesota home buyers

Test for radon before you close.

About one in three houses we test has high radon levels, and there’s no way to tell by looking. Testing during your inspection period gives you an answer while you can still do something about it.

Schedule a Radon Test — $225Call 952-915-6466
What to expect

Built around real estate deadlines.

Our radon testing is designed for home purchases, so you get accurate results fast enough to act on them.

A 48-hour test

Quick turnaround, so your results come back well within a typical inspection period.

Hour-by-hour results

We use continuous electronic monitors that show how radon levels changed over every hour of the test.

Licensed technicians

Our radon technicians are licensed in compliance with the State of Minnesota.

Radon in Minnesota

Common here, and impossible to predict.

Radon is a gas formed by the breakdown of uranium and radium, both found at high levels in Minnesota.

  • Every home is susceptible. That includes new construction.
  • High levels are common. About one out of three houses we test comes back high.
  • Neighbors don’t tell you much. Two houses built side by side, at the same time and the same way, can have very different levels.
  • The lowest lived-in level matters most. That’s the area of a home most at risk.
Why test

Two reasons: your health and your money.

Radon testing is recommended by the EPA, the Surgeon General, the American Lung Association and the Minnesota Department of Health.

Lung cancer

Radon is the leading cause of lung cancer among non-smokers, and the second leading cause of lung cancer overall.

Someone else may pay

When results come back high, buyers typically ask the seller to pay for or install a mitigation system. These systems work very well and aren’t outrageously expensive.

Or you pay later

Skip the test, and the next buyer will likely test when you sell. If it comes back high, you’re the one paying for mitigation. This happens a lot.

Common objections

“Do I really need a radon test?”

We hear plenty of reasons to skip it. Some are valid, some aren’t.

“The home doesn’t have a basement.”

Fair point. Most homes without basements have very low radon. Walkout basements tend to be lower too, but we’ve still found our share of high results in them.

“It’s new construction.”

Minnesota requires a passive radon mitigation system in every new house. That lowers the odds of high radon, but it doesn’t eliminate it.

“It already has a mitigation system.”

If it’s working properly, levels are probably very low. We’ve never found high radon in a home with a working system.

“It’s a bank-owned home or short sale.”

The seller won’t pay to fix it, and you want the house either way. Fair enough, but run a do-it-yourself test once you own it.

“I’ll do my own test.”

That’s fine, but a DIY test can’t be part of the real estate transaction.

“Radon is a government conspiracy.”

We’re not going to argue that one. But even if radon were only a perceived problem, it would still be a liability when you sell.

Already own your home?

Use a long-term test kit

For a home you already live in, a do-it-yourself kit is your best option, and long-term kits give the most accurate results. We don’t sell them, but we know where to get one for a good price.

Where to Buy a Test Kit
Learn more

More on radon in Minnesota.

We’ve written a lot about radon testing, mitigation and Minnesota’s rules. Start with any of these.

  • Radon testing requirements for Minnesota
  • Minnesota permit requirements for radon mitigation systems
  • Should you rely on the seller’s radon test results?
  • Minnesota Radon Awareness Act
  • Do new Minnesota homes with passive radon mitigation systems need to be tested?
  • Radon-Resistant Construction In Minnesota
  • Radon in granite
  • Explanation of radon results
  • The basics of radon testing and mitigation systems
  • Six things to consider before testing for radon
  • The most common myths about radon

Know your radon level before you close.

A 48-hour test with hour-by-hour results, from licensed Minnesota radon technicians.

Schedule a Radon Test — $225Call 952-915-6466
FAQ

Radon Testing FAQs

Quick answers from the Structure Tech team. Don’t see your question? Call (952) 915-6466.

Why should I test for radon when buying a home?

A radon test tells you whether the house you’re buying has elevated radon levels.

Doing it during your inspection period means you’ll have the results while there’s still time to talk with your agent about what to do.

How long does a radon test take at Structure Tech?

Our real-estate radon tests run for 48 hours.

Plan ahead so the test and the results both fit inside your inspection deadline.

How does Structure Tech measure radon?

We use continuous electronic monitors that give an hour-by-hour breakdown of the radon levels.

That’s a lot more useful than one number at the end. And yes, our Minnesota radon technicians are licensed for this work.

Should a new home be tested for radon?

Yes. New homes can have high radon levels too.

The age of the house tells you nothing about its radon level. The only way to know is to test.

Do windows and doors need to stay closed during radon testing?

Yes. Radon testing requires closed-house conditions, other than normal coming and going.

Follow the prep instructions we send you, and please leave the monitor alone while it does its thing.

What if the home already has a radon mitigation system?

It’s still worth testing a house that has a radon mitigation system.

A fan on the wall doesn’t prove the radon level is where it should be. Send us any previous test results and info about the system when you schedule.

Can I use my neighbor’s result to judge this home?

No. Your neighbor’s radon result tells you nothing about your house.

Houses right next door to each other can have wildly different levels, so test the one you’re actually buying.

What radon level calls for action?

The Minnesota Department of Health recommends mitigation at 4 pCi/L or higher, and considering it between 2 and 4 pCi/L.

Go over your results and next steps with a qualified radon professional.

What happens if my radon test result is high?

If your radon result is high, a licensed radon mitigation professional can look at ways to bring it down.

If you’re buying, talk with your agent about the result and any agreement with the seller while you’re still inside your inspection timeline.

Will the seller have to pay for mitigation?

Not necessarily. The test tells you the radon level, and that’s it.

Who pays for mitigation is something you work out through the purchase process, and your agent can help you sort through your options.

Can I test a home I already own for radon?

Yes. If you don’t have a real-estate deadline, a do-it-yourself radon kit works just fine.

Our radon page links to test-kit resources, including long-term tests that show you what your levels look like over a longer stretch of time.

What happens if radon test conditions are not maintained?

Open windows, a bumped monitor, or other changes can throw off a radon test, and you may need to test again.

If something happens during the test, give us a call.

Still have questions? We’re happy to help.

Schedule Your Inspectionor call (952) 915-6466 · Monday – Sunday, 8 am – 5 pm
Recent tests

Radon tests across the Twin Cities.

Footer

Schedule your inspection
(952) 915-6466
info@structuretech.com

Monday – Sunday: 8 am – 5 pm

Subscribe to our blog ›
  • Education
  • Employment
  • Privacy Policy
  • Terms of Service
  • Disclaimer
  • Cookie Policy
  • All Links
  • St. Paul-Specific Information
  • Minneapolis-specific Information

Copyright © 2026 Structure Tech

Website designed and hosted by BizzyWeb

Popular: RadonStuccoSewerPricing

Moisture Testing Release Form

  • Moisture Testing Release Form *

    This form must be completed and signed prior to us conducting any moisture testing. We cannot perform the moisture testing requested by the buyers without this form being signed.

    Please call if you have any questions.

    Structure Tech specializes in the moisture testing of buildings for the purpose of determining if there is moisture located behind the exterior wall cladding. A moisture inspection of your property has been requested.

    In order to perform this inspection, we need the permission of the owner. We should have access to all parts of the exterior. Any security systems will need to be shut off during the testing, which can take several hours. We use standard industry practices for conducting the moisture tests, which includes the use of a penetrating probe meter to verify the moisture content of the structural wood and sheathing of the building. 3/16” holes will be placed under most windows and other possible moisture entry areas. These holes will be filled with caulk when the testing is completed.

    We will make every effort to use a caulk that closely matches the color of the surrounding siding; however in some cases the holes may be noticeable upon close inspection. If the holes are of any cosmetic concern the property owner can have them painted with a matching paint.

    I understand the above information and give my permission to test the building located at: