See inside the ducts under your floor.
Ductwork buried below the basement slab can collect water and grow mold, quietly affecting your indoor air. Our camera inspection shows you exactly what’s down there.
A home inspection can only see so far.
Through the supply registers, a home inspector can see just a short section of buried ductwork. Our Ridgid inspection cameras travel through the ducts to scope the rest.
Moisture intrusion
Water getting into sub-slab ducts is common in older homes, and it’s hard to spot from above.
Mold growth
Moisture in the ducts can lead to mold, which can affect your home’s indoor air quality.
Camera inspection
Advanced Ridgid cameras let us see what the registers can’t.
A clear picture of your ductwork.
You’ll understand the condition of your sub-slab ductwork and know the next steps for maintenance or repairs.
- A detailed report with photos of what we found
- A narrated video walking you through our findings
- Recommendations for any services needed
- A schematic of your sub-slab ductwork for future reference
$395
Available with a home inspection or on its own, for buyers and homeowners. Questions? Call 952-915-6466.
Find out what’s in your ducts.
A camera inspection, narrated video and a clear report.
Sub-Slab Ductwork Inspection FAQs
Quick answers from the Structure Tech team. Don’t see your question? Call (952) 915-6466.
What is a sub-slab ductwork inspection?
A sub-slab ductwork inspection is when we send a camera through the heating and cooling ducts that run under your basement floor.
It gives us a much closer look than we could ever get by peering down a floor register.
Why inspect ducts below the slab?
Water can get into ducts under the slab and cause problems that are really hard to see.
A camera inspection documents the condition of the ducts we can reach and shows where attention is needed.
Is a sub-slab duct camera inspection included in a home inspection?
No. A sub-slab duct camera inspection is a separate service.
During a home inspection, all we can see is the little bit that’s visible through the registers.
What equipment does Structure Tech use to inspect sub-slab ducts?
We use Ridgid inspection cameras to scope the sub-slab ductwork.
The camera lets us see sections of the system way beyond what’s visible from the register opening.
What does a sub-slab duct inspection report include?
Your sub-slab duct inspection report includes photos, a narrated video, recommendations, and a schematic of the ductwork.
That makes it a lot easier to understand what’s going on under your floor.
Does a sub-slab duct inspection include cleaning?
No. We document the condition of the ducts and recommend next steps, but we don’t clean them.
If they need cleaning or repairs, talk with an appropriate contractor.
Can the camera confirm whether a substance is mold?
No. The camera shows us what’s there, but it can’t confirm whether something is mold.
If mold is a concern, it may need a separate evaluation or sampling.
How do I know whether my home has sub-slab ducts?
If you’re not sure, send our office some info about the house and a few photos of your floor registers or mechanical equipment.
We’ll help you figure out whether a sub-slab duct inspection makes sense.
How much does a sub-slab duct inspection cost?
Our sub-slab duct inspection is $395.
Give our office a call to confirm the current price and get it on the calendar.
Still have questions? We’re happy to help.
Schedule Your Inspectionor call (952) 915-6466 · Monday – Sunday, 8 am – 5 pm